Input to

Blackmagic Design Atem Production Studio 4k Live Switcher Compras y lo retiras HOY! Fíjate mi reputación, soy vendedor serio, compra con confianza. Lo traje de afuera para vender. INCREIBLE SWITCHER DE VIDEO, DESTACATE UTILIZANDO ESTE SWITCHER SD, HD, 4K PROFESIONAL. Cualquier duda consultame. ENTREGA INMEDIATA The Blackmagic ATEM Production Studio 4K Live Switcher is a live event multi camera production switcher with 8 individual Ultra HD inputs built into a 1RU chassis. Supporting NTSC/PAL/HD and Ultra HD video formats via Four Single Link 6G-SDI and Four 4K HDMI inputs, the switcher connects to a wide range of cameras and sources, delivering a single program stream in SD, HD, or Ultra HD video. All this is done live and in real time with no rendering required. The switcher features a reference video input for synchronizing the switcher to other equipment using Tri-level or Blackburst Sync. Each input also features its own frame synchronizer, which allows you to use cameras that do not feature Genlock as well as input video from computer sources. The switcher can handle inputs from all inputs at the same time. The switcher provides six video outputs that are always active. Featuring one SDI and one HDMI Program output, both of which deliver SD/HD/Ultra HD, with one Aux SD/HD/Ultra HD Output that can deliver a clean Program feed without any downstream effects, as primary outputs. The switcher also features an HD only Program output signal for monitoring on an SDI-equipped HD monitor. Multiview monitoring is also HD only over dedicated SDI or HDMI output, and Multiview allows you to view the Program, Preview, six active inputs and two graphic channels (media players) on one screen at the same time. The switcher features a built-in compliment of one Upstream and two Downstream keyers for real time effects and composites in Ultra HD, with 10-bit processing. The two downstream keyers allow you to use two graphics/logos/titles/lower thirds from up to twenty stored graphics in a wide variety of formats. A built-in two channel audio mixer handles the embedded HDMI and SDI audio from the six active video inputs as well as audio from the balanced and unbalanced analog audio inputs to provide you flexibility and creative audio options. Audio output is embedded in the SDI and HDMI stream, as well as available via balanced audio outputs. Either a Mac or PC running the included ATEM Software controls the switcher's operation and settings. For those who like the feel of a physical control panel, available ATEM Broadcast Panels, connected via the Ethernet port, also control all the features of the switcher. Illuminated front panel buttons allow you to locally select the Aux output, while a two inch LCD screen built into the front of the unit allows you to see the Aux output for instant confirmation of the correct output. Video The ATEM Production Studio Live 4K Switcher supports 4K Ultra HD video (3840 x 2160), which is four times the resolution of Full HD. It has eight video inputs, all of which can be active simultaneously. The switcher features four single link 6G-SDI and four HDMI 4K inputs, which allows you to connect SD/HD/Ultra HD and computer-based signal to the switcher. Although the switcher takes reference video in for sync timing so that it can interface with other post production equipment, each input has its own Frame synchronizer, which enables you to use cameras that do not have genlock capability or for input of computer sources such as Keynote or PowerPoint Presentations The capture video format is set by the user, and must be the same across each input, as the switcher cannot scale different input formats to match the project format. Audio The switcher includes a built-in audio mixer that allows you to adjust the audio embedded in the SDI and HDMI signals. With 10 inputs available the 2 channel mixer can also adjust levels of both the balanced and unbalanced analog inputs. 6 Video Outputs The switcher features 3 program outputs for the final video, delivering SD/HD/Ultra HD via both a 6G-SDI port and HDMI 4K connector. The third program output is an HD-SDI only port (Ultra HD is automatically down-converted). Two Multi-view outputs allow you to see Program, Preview, the 6 live inputs and the two graphic channels on one screen at the same time. There is 1 SDI and 1 HDMI connector which feeds the Multi-view output to HD monitors. The switcher features an SDI Aux output that is capable of delivering the Program out feed with or without the downstream keyer effects in SD, HD and Ultra HD. Control of the Aux output is by front mounted panel buttons, and built-in 2-inch LCD screen for immediate confirmation of the Aux output. Multi View Monitoring Multi view allows you to view the program, preview, 6 live inputs and 2 media players side by side. You can also add custom labels that make it easy to identify each input. Effects The switcher features an upstream keyer that includes independent chroma, pattern, shaped and luma keying all at Ultra HD resolution with 10-bit processing. Two downstream keyers allow you to add graphics, lower thirds, titles and logos for a polished live production. Control Interface The ATEM 4K switcher uses an Ethernet connection to interface with control surfaces such as the optional ATEM 1 M/E and 2 M/E Broadcast Panels. You can also control the switcher by using the included ATEM Software Control software from a Mac or Windows computer over Ethernet. You can control all production settings of the switcher as well as directly import graphics from your computer into the switcher's media pool. You set the format for each project you are working on, from SD to HD to Ultra HD, selecting resolution and frame rate. This is accomplished by using either the included software for Mac/PC, or via the ATEM 1 M/E or ATEM 2 M/E Broadcast Panel. Using the Ethernet port on the switcher allows you to connect control surfaces directly to the switcher or you can control the switcher across a network. The Switcher features a mini USB port that is used for software updates and to set the switcher's Chassis IP address, which can only be done by using a computer running the ATEM Switcher Utility connected to the switcher's USB port. Rack Mount The switcher is a single RU in height and has built-in rack mount ears, for mounting in a production road case or in a post production facility.

Marshall DYNAMIC BASS SYSTEM 72115 (COMBO)[1996-2000] Amplificador Marshall para bajo modelo Dynamic Bass System de 200 W RMS, amplificador en perfecto estado y funcionamiento. Tiene 7 bandas de ecualización, control de mezcla de pre, compresor, entrada Hi y Low. Equipo de finales de la década de los 90, alrededor de 1997, está revisado y funcionando perfectamente, no tiene nada fuera de lugar. NO PERMUTO, SOLO VENTA 1. Hi-sensitivity Input Input for the connection of bass guitars with lower output levels. 2. Lo-sensitivity Input Input for the connection of bass guitars with higher output levels. 3. Gain Control with Peak LED Controls the level of input gain. For optimum signal level the peak LED should light occasionally. 4. Pre-Amp Blend Control This control fully anti-clockwise routes the signal through purely solid state input pre-amp circuitry. Turned fully clockwise the signal is routed through an ECC83 pre-amp valve circuit. The various positions in between offer numerous combinations of the brighter more percussive solid-state tone with that of warmer more compressed valve tone. 5. Deep Switch Push switch to add extra bottom to the low end of the primary EQ. 6. Low Primary EQ Control Rotary control that gives + or - 15dB cut and boost of the lower end of the primary EQ. 7. Bright Switch Push switch to add brightness and attack to the top end of the primary EQ. 8. High Primary EQ Control Rotary control that gives + or - 15dB cut or boost of the primary EQ upper frequencies. 9. Graphic Equaliser 7 Band graphic equaliser offering + or - 15dB cut or boost (centre flat) of the frequencies that proved to be the most effective for bass reproduction in our exhaustive listening tests. 10. Graphic On/Off Switch and Indicator Push switch to access or by-pass the graphic with LED indicating on/off status. (The graphic is also footswitchable by any standard on/off footswitch). For the footswitch to function the front panel switch must be in the ‘Off’ position. 11. Compression Depth Control Rotary control for selecting the depth of compression. Note: This control works in conjunction with input Gain control (3). The input Gain control should be used to set the threshold level and the Depth control to select the amount of compression. 12. Compression Threshold Indicator LED which indicates when the compression threshold is reached3. Compression On/Off Push Switch Push switch which activates the compression circuit. 14. Volume Control Rotary control to set the overall output level of the amplifier. 15. D.I. Pre or Post EQ Selection Switch Selection switch to offer a studio or PA engineer with the choice of direct signal either before or after EQ and compression has been added. 16. Power Switch On Off mains power switch with LED indicator and featuring soft start circuitry to minimise switch on and switch off noise

Hola! Somos Wenext . ar DVR HIKVISION - MODELO DS-7204HQHI-K1 CARACTERÍSTICAS PRINCIPALES: * 4 canales de video * 1 canal de audio * H.265 * Graba hasta 3 Megapíxeles de resolución ESPECIFICACIONES TÉCNICAS: -ENTRADAS DE VIDEO/AUDIO- Video compression: H.265+/H.265/H.264+/H.264 Analog video input: 4-ch BNC interface (1.0 Vp-p, 75 O), supporting coaxitron connection HDTVI input: 3 MP, 1080p30, 1080p25, 720p60, 720p50, 720p30, 720p25 Note: The 3 MP signal input is only available for channel 1 of DS-7204HQHI-K1 AHD input: 1080p25, 1080p30, 720p25, 720p30 HDCVI input :1080p25, 1080p30, 720p25, 720p30 CVBS input: PAL/NTSC IP video input: 1-ch Up to 4 MP resolution Audio compression: G.711u Audio input: 1-ch, RCA (2.0 Vp-p, 1 KO) -SALIDAS DE VIDEO/AUDIO- CVBS output; 1-ch, BNC (1.0 Vp-p, 75 O), resolution: PAL: 704 × 576, NTSC: 704 × 480 HDMI/VGA output: 1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz Encoding resolution When 1080p Lite mode not enabled: 3 MP/1080p/720p/VGA/WD1/4CIF/CIF; When 1080p Lite mode enabled: 3 MP/1080p lite/720p lite/VGA/WD1/4CIF/CIF Frame rate Main stream: When 1080p Lite mode not enabled: For 3 MP stream access: 3 MP/1080p/720p/VGA/WD1/4CIF/CIF@15fps For 1080p stream access: 1080p/720p@15fps; VGA/WD1/4CIF/CIF@25fps (P)/30fps (N) For 720p stream access: 720p/VGA/WD1/4CIF/CIF@25fps (P)/30fps (N) When 1080p Lite mode enabled: 3 MP@15fps 1080p lite/720p lite/VGA/WD1/4CIF/CIF@25fps (P)/30fps (N) Sub-stream: WD1/4CIF@12fps; CIF@25fps (P)/30fps (N) Video bit rate 32 Kbps to 6 Mbps Audio output 1-ch, RCA (Linear, 1 KO) Audio bit rate 64 Kbps Dual stream Support Stream type Video, Video & Audio Synchronous playback: 4-ch -ADMINISTRACION REDES- Remote connections: 128 Network protocols TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, https, ONVIF -OTRAS CARACTERÍSTICAS- Hard disk SATA 1 SATA interface Capacity Up to 6 TB capacity for each disk Two-way audio input 1-ch, RCA (2.0 Vp-p, 1 KO) (using the 1st audio input) Network interface 1, RJ45 10M/100M self-adaptive Ethernet interface USB interface 2 × USB 2.0 Front panel: 1 × USB 2.0 Rear panel: 1 × USB 3.0 Serial interface RS-485 (half-duplex) Power supply 12 VDC Consumption (without HDD) = 6 W Working temperature -10 ºC to +55 ºC (+14 ºF to +131 ºF) Working humidity 10% to 90% Dimensions (W × D × H) 315 × 242 × 45 mm (12.4 × 9.5 × 1.8 inch) Weight (without HDD) = 1.16 kg (2.6 lb)

VENTA DE SINTOAMPLIFICADOR YAMAHA RX V1400 CON CONTROL REMOTO ORIGINAL EN IMPECABLE ESTADO DE USO Y FUNCIONAMIENTO. (CASI NO SE USABA) ES EL DE LAS FOTOS, VENTA EN MANO.-TIENE UN SONIDO EXCELENTE Y MUCHISIMAS FUNCIONES DIGITALES PARA PROGRAMAR. EL CONTROL REMOTO ES TAMBIEN LUMINOSO. REALMENTE UN PRODUCTO DE CALIDAD YAMAHA INDISCUTIBLE!!!!! INFORMACION QUE ENCONTRE POR INTERNET: Specifications Advanced Connections RS-232C Interface Yes Custom Features Zone 2 Audio Output Yes Zone 3 Audio Output Yes Zone Control via Remote Unit Yes Advanced Connections Multi-Channel External Input 8ch Custom Features Sub Remote Control Unit Zone Remote Advanced Features iPod/iPhone Compatibility via Yamaha Universal Dock Yes High Picture Quality 1080p-Compatible HDMI Yes Deep Color (30/36 Bit) Yes 120Hz and 1080p/24Hz Refresh Rates Yes Auto Lip-Sync Compensation Yes Analog to HDMI Upscaling yes (up to 1080p) Analog to HDMI Deinterlacing (480i to 480p) Yes Full Analog Video Upconversion to HDMI yes (with TBC) Component Video Upconversion Yes Advanced Features System Memory yes (6 Main) FM/AM Tuner Yes XM Ready with XM HD Surround yes (Neural-THX Surround) YPAO Sound Optimization Yes Dialogue Lift Yes Compressed Music Enhancer yes (with Straight Enhancer) Adaptive DRC (Dynamic Range Control) Yes Initial Volume and Maximum Volume Setting Yes Audio Delay for Adjusting Lip-Sync yes (0-240 ms) On-Screen Display Yes Remote Control Unit Macro/Learning/Preset High Sound Quality Digital ToP-ART / High Current Amplification Yes 192kHz/24-Bit DACs for All Channels yes (Burr-Brown) Dolby TrueHD Yes Dolby Digital Plus Yes DTS-HD Master Audio Yes Dolby Digital EX Yes DTS-ES Discrete 6.1, DTS 96/24 Yes Pure Direct yes (incl. Bitstream) Linear Damping Yes Phono Input Yes Assignable Amplifiers for Bi-Amp Yes Advanced Connections HDMI Input/Output 4 / 1 Channels 7.1-channel Surround Realism DSP Programs 22 Adaptive DSP Level Yes SILENT CINEMA / Virtual CINEMA DSP Yes Advanced Connections S-Video Input/Output 6 / 3 Preout Terminal F/C/Sr/Sb/Sw Custom Features Zone Tone Control yes (Zone 2/3) 12V Trigger Output yes (x 2) Remote (IR) Input/Output Yes RMS Power (8 ohms, 20Hz-20kHz) [THD] 130W x 7 [0.04%] Dynamic Power/Channel (8/6/4/2 ohms) 160/195/255/335 W Damping Factor (8 ohms, 20 Hz-20 kHz) 150 Total Harmonic Distortion (20 Hz-20 kHz, CD) 0.04% Signal-to-Noise Ratio (CD, 250 mV) 100 dB Dimensions (W x H x D) 17-1/8" x 6-3/4" x 17-1/4" Weight 37.5 lbs. Advanced Connections Audio Digital Input (Optical / Coaxial) 8 (5 / 3) Component Video Input / Output 3 / 1 Front Panel Video Aux Terminal S-Video/O

MODULO REGULADOR SWITCHING DC-DC BOOST STEP-UP - 150W - IN: 10-32V - OUT: 12-35V - 6A - Eff: 94% - - IDEAL VEHICULOS UAV ROBOTICA - Features : Module Properties: non-isolated step-up module (BOOST) Input voltage :10-32V Output voltage: 12-35V (adjustable) Output Current: 10A (MAX) Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A) Output power: Natural cooling 100W (MAX), Enhance heat dissipation 150W (MAX) with Fan Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°C Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A) Output Ripple: 2% (MAX) 20M-bandwidth Operating Temperature: Industrial (-40°C to +85°C) (ambient temperature exceeds 40°C, lower power use, or to enhance heat dissipation) Full load temperature rise: 45°C No-load current: 25mA typical Voltage regulation: ±0.5 Dynamic response speed: 5% 200uS Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (Please Series diode at the input port.) Size: 65x33x23.5 mm Connection: solderless, terminal

Módulo Bluetooth Con Remoto Usb/sd/fm/aux. Caba... Anri Tv ANRI TV LOCAL A LA CALLE (ZONA DEVOTO) CABA. HORARIOS DE ATENCIÓN: DE LUNES A VIERNES DE 8.30 A 12.00 Y DE 14.30 A 19.30 Y LOS SABADOS DE 8.30 A 13.00 HS HACEMOS ENVIOS POR CUALQUIER MEDIO DE TRANSPORTE (MERCADOENVIOS, MOTOMENSAJERIA CABA, OCA, CORREO ARGENTINO, VIACARGO, ECAPACK, ETC) Módulo Bluetooth Con Control Remoto Usb/sd/fm/aux. Anri Tv Tamaño del panel: 108*26*33mm (L * W * H) Tamaño del agujero: 84mm * 20mm Centro tamaño del agujero: 94mm. Características del producto: 1: Apoyo APE, FLAC, no destructiva formato WAV y WMA, formato de decodificación MP3 cinco, cubre los principales formatos de audio. 2: Función bluetooth de reproducción de música, soporte de bluetooth con el teléfono móvil. 3: Función de radio fm estéreo. 4: Función USB de la tarjeta de sonido, el puerto de decodificación USB conecta al puerto USB del ordenador (puede estar en el tablero del decodificador de audio señal de salida de audio del ordenador). 5: Función de control remoto de infrarrojos (emisor y receptor). 6: Función de soporte de corte. USB computer sound card to use: take a both ends is USB plug line, respectively, into the computer's USB port and USB port, decoder board computer installed driver, recognition to the decoder board, can play the music in the computer. Can also copy the songs in the computer through the USB cable to the TF card. Folder switching method: long press on the remote control of or under the poem, switch folder. Warm Tips: This product is a semi-finished products, professional knowledge. Customers with professional electronic capabilities are needed to pack good, no foundation of customers, do not recommend to buy, there is the risk of damage to the circuit board, thank you. This product is the requirement of power supply: Products use DC DC, can not use the ac power. Power is required: the product voltage of 12 v, is not a simple said, as long as my power supply is 12 v, can work to the decoder board. This view is wrong. Decoding board work voltage can not exceed the prescribed voltage first! Moreover power circuit takes four of rectifier diode full-wave rectifier circuit, through the enough capacity of the filter capacitor (generally we choose the capacity of 2200 uf capacitance) output pure dc to decode board safe use. Filter capacitor capacity if not enough, can cause decoding board output current sound, serious can cause decoding board damaged because of the power supply ripple is too big. Connection details: 1) 2 p red seat: GND connect power anode, connect the dc + 12 v DC7-12 v positive; 2) 3 p white saddle: R - O is right sound channel audio output, AGND is an audio ground, L - 0 is left sound channel audio output; 3) 3 p white saddle: L - IN the outer left sound channel input, AGND is outside the ground, R - is IN the right sound channel input sound; 4) 3.5 headset seat: headphones sound output, didn't meet borne power amplifier can be in the direct plug in headphones to listen to music; 5) the ANT is white solder welding position of the radio antenna, radio antenna can choose more than 1 m copper wire or rod antenna, radio different effects depending on the different geographical environment Bluetooth operation: Press the

Módulo Bluetooth Con Remoto Usb/sd/fm/aux. Caba... Anri Tv ANRI TV LOCAL A LA CALLE (ZONA DEVOTO) CABA. HORARIOS DE ATENCIÓN: DE LUNES A VIERNES DE 8.30 A 12.00 Y DE 14.30 A 19.30 Y LOS SABADOS DE 8.30 A 13.00 HS HACEMOS ENVIOS POR CUALQUIER MEDIO DE TRANSPORTE (MERCADOENVIOS, MOTOMENSAJERIA CABA, OCA, CORREO ARGENTINO, VIACARGO, ECAPACK, ETC) Módulo Bluetooth Con Control Remoto Usb/sd/fm/aux. Anri Tv CON SU COMPRA SE LLEVA EL MANUAL DE INSTALACION PASO A PASO Tamaño del panel: 108*26*33mm (L * W * H) Tamaño del agujero: 84mm * 20mm Centro tamaño del agujero: 94mm. Características del producto: 1: Apoyo APE, FLAC, no destructiva formato WAV y WMA, formato de decodificación MP3 cinco, cubre los principales formatos de audio. 2: Función bluetooth de reproducción de música, soporte de bluetooth con el teléfono móvil. 3: Función de radio fm estéreo. 4: Función USB de la tarjeta de sonido, el puerto de decodificación USB conecta al puerto USB del ordenador (puede estar en el tablero del decodificador de audio señal de salida de audio del ordenador). 5: Función de control remoto de infrarrojos (emisor y receptor). 6: Función de soporte de corte. USB computer sound card to use: take a both ends is USB plug line, respectively, into the computer's USB port and USB port, decoder board computer installed driver, recognition to the decoder board, can play the music in the computer. Can also copy the songs in the computer through the USB cable to the TF card. Folder switching method: long press on the remote control of or under the poem, switch folder. Warm Tips: This product is a semi-finished products, professional knowledge. Customers with professional electronic capabilities are needed to pack good, no foundation of customers, do not recommend to buy, there is the risk of damage to the circuit board, thank you. This product is the requirement of power supply: Products use DC DC, can not use the ac power. Power is required: the product voltage of 12 v, is not a simple said, as long as my power supply is 12 v, can work to the decoder board. This view is wrong. Decoding board work voltage can not exceed the prescribed voltage first! Moreover power circuit takes four of rectifier diode full-wave rectifier circuit, through the enough capacity of the filter capacitor (generally we choose the capacity of 2200 uf capacitance) output pure dc to decode board safe use. Filter capacitor capacity if not enough, can cause decoding board output current sound, serious can cause decoding board damaged because of the power supply ripple is too big. Connection details: 1) 2 p red seat: GND connect power anode, connect the dc + 12 v DC7-12 v positive; 2) 3 p white saddle: R - O is right sound channel audio output, AGND is an audio ground, L - 0 is left sound channel audio output; 3) 3 p white saddle: L - IN the outer left sound channel input, AGND is outside the ground, R - is IN the right sound channel input sound; 4) 3.5 headset seat: headphones sound output, didn't meet borne power amplifier can be in the direct plug in headphones to listen to music; 5) the ANT is white solder welding position of the radio antenna, radio antenna can choose more than 1 m copper wire or rod antenna, radio different effects depending on the different geographical environment Bluetooth operation: Press the

Excelente Amplificador de bajo Ashdown Five Fifteen Combo 100 Watts/Parlante 1x15 " La práctica amp Five Fifteen bajo combina una sección de potencia de 100 vatios con un solo altavoz de graves Ashdown BlueLine 15 ". Los sonidos pueden ser de forma rápida e intuitiva utilizando controles de bajos, medios y agudos. Salida de auriculares para practicar en privado junto con una salida de altavoz de extensión. una entrada de CD / Line te permite tocar junto con tus canciones favoritas. Especificaciones Potencia de salida (RMS) 100W  Configuración de altavoces 1 x 15 " Line Impedancia de entrada 1M Ohm, entrada range100mV a 10V H x W x D (mm) 550 x 459 x 544 Peso (kg) 26,8 Five 15 Specifications Power Output (RMS) 100watts RMS into 4ohms Frequency Response -3db at 22hz and 25khz High Instrument Input Impedance - 3.9M ohms Input range 150mv to 20v p - p Low Instrument Input Impedance - 10k ohms Input range 300mv to 40v p - p Signal to noise Better than 80db (E.Q. Flat) EQ Bass +/- 15db @ 100hz. Lo Mid +/- 15db @ 340hz. Mid +/- 15db @ 660hz. Hi Mid +/- 15db @ 1.6Khz. Treble +/- 15db @ 7khz shelving. Distortion Less than 0.5% THD Su consulta no molesta. el equipo esta impecable Ashdown Five Fefteen Combo. Impecable. Casi Sin Uso $

Descripción PLACA DE AUDIO MIDI PLUS STUDIO 2 PROFESIONAL 24 Bit 192 KHZ Características • Marca Midiplus • Línea STUDIO 2 • Modelo Studio 2 • Fabricante Midiplus • Modelo alfanumérico Studio 2 • Tipo Externa • Interfaz USB • Conexión midi NO • Número de preamplificadores 2 • Número de salidas de auriculares 1 Producto: Placa de Audio Usb Midiplus Studio 2 24 bits / 192 kHz. CONVERTÍ TU CASA EN UN ESTUDIO DE GRABACIÓN STUDIO 2 es la mejor y más compacta opción para tus grabaciones. Sus conversores poseen una resolucion máxima de 192 Khz a 24 Bits de profundidad, asegurandote siempre la mejor calidad. - DISEÑO MODERNO LAS MEJORES PRESTACIONES: - FICHAS COMBO AMPHENOL - CONTROLES DE GANANCIA - SELECTOR LINEA / INSTRUMENTO - SELECTOR PHANTOM POWER - MONITOREO DIRECTO PRE ESCUCHA MONO/STEREO - SALIDA AURICULARES CON VUMETRO DE SALIDA -GRABÁ TUS PROYECTOS DONDE SEA - IDEAL POR SU ESTRUCTURA ROBUSTA - LLEVALA DONDE QUIERAS Especificaciones Técnicas: - 2 Entradas / 2 Salidas 192 Khz 24 Bits - ASIO - WDM - Preamplificadores de alta calidad - Selector de instrumento/Línea - Control de Ganancia con indicador de Sonoridad - Phantom Power 48v - Salidas para monitores 1/4" TRS Balanceadas - Salida de Auriculares 1/4" Plug - Control de volumen para monitores y auriculares - Control de Monitoreo directo -MONO/STEREO - Vumetro de salida STEREO de 6 segmentos Dimensiones: - Tamaño de la Caja: 265 x 165 x 80 mm - Tamaño del Producto: 190 x 150 x 50 mm - Peso del producto: 380 g. - Peso con Caja: 460 g. MICROPHONE: - Frecuency Response 20hz - 20 kHz +/- 0.1 dB - THD+N -101 dB (minimum gain -1 dBFS input with 20Hz - 20 kHz filter) - Equivalent input 100 dB - Gain Range -17 dB to +33 dB - Max input Level +16 dBu INSTRUMENT - Frecuency Response 20hz - 20 kHz +/- 0.1 dB - THD+N -83 dB (minimum gain -1 dBFS input with 20Hz - 20 kHz filter) - Noise -92 dBu (22Hz - 22 kHz filter) - Gain Range -4 dB to +46 dB - Max input Level +4 dBu ANALOG OUTPUT PERFORMANCE - Nominal Output Level 0 dBFS= 10dBu balanced - Frecuency response 20hz - 20 kHz +/- 0.2 dB - THD+N -99 dB (minimum gain -1 dBFS input with 20Hz - 20 kHz filter) - Output Impedance <10O - Power Output into 150O 15mW - Power Output into 50O DIGITAL PERFORMANCE - Clock source internal - A/D dynamic range 105 dB A-weighted - D/A dynamic range 104 dB A-weighted - Sample Rate 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz - Bit Depth 24 Bits Se entrega con: - Manual - Cable USB - Adaptador Miniplug a Plug Stereo

PROYECTOR PANASONIC PT-VW530 WUXGA 5000 lm - Uso Profesional Usado en perfecto estado (ningun detalle!) Especificaciones: AC100-240 V, 50/60 Hz Power consumption 362 W Standby power consumption Standby Mode (Eco) 0.4 W Standby Mode (Normal) 8 W LCD panel Panel size 15.0 mm (0.59 in) (16:10 aspect ratio) Display method Transparent LCD panel (x 3, R/G/B) Pixels 1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels Lens 1.6x manual zoom (throw ratio: 1.2-1.9:1), manual focus, F 1.60-1.90, f 15.31-24.64 mm Lamp 270 W x 1, lamp replacement cycle (lamp power: Normal/Eco): 5,000 hours/7,000 hours Screen size (diagonal) 0.76-7.62 m (30-300 in), 16:10 aspect ratio Brightness 5,000 lm (input signals: PC, lamp power: Normal, picture mode: Dynamic) Center-to-corner uniformity 85 % Contrast 10,000:1 (full on/off) (input signals: PC, lamp power: Normal, picture mode: Dynamic, iris: On) Resolution 1,280 x 800 pixels Scanning frequency HDMI / DIGITAL LINK 525i (480i)*3, 625i (576i)*5, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, 1125 (1080)/60i, 1125 (1080)/50i, Displayable resolution: VGA to WUXGA (non-interlace), Dot clock frequency: 25 MHz to 162 MHz (compatible with HDCP, DIGITAL LINK not included on PT-VW530) RGB (analog) fH: 15-91 kHz, fV: 24-100 Hz, dot clock: 162 MHz or lower YPBPR (YCBCR) fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)], fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)], fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p], fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i], fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p], fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF], fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p], fH: 15.63 kHz, fV: 50 Hz [576i (625i)], fH: 31.25 kHz, fV: 50 Hz [576p (625p)], fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p], fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i], fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p], fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p], fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] Video/S-Video fH: 15.73 kHz, fV: 59.94 Hz [NTSC / NTSC4.43 / PAL-M / PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL / PAL-N / SECAM] Optical axis shift Vertical: +48 %, U/D ratio on top end: 49:1 Keystone correction range Vertical: ±35° (auto/manual, input: WXGA), horizontal: ±35° (manual, input: WXGA) Installation Ceiling/floor, front/rear Terminals HDMI IN HDMI 19-pin x 2 (compatible with HDCP), audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) COMPUTER 1 IN D-sub HD 15-pin (female) x 1 (RGB / YPBPR / YCBCR / YC x 1) COMPUTER 2 IN / MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu) VIDEO IN Pin jack x 1 (Composite VIDEO) AUDIO 1 IN M3 x 1 (L-R x 1) AUDIO 2 IN (MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable) AUDIO 3 IN Pin jack x 2 (L, R x 1) AUDIO OUT M3 x 1 (L-R x 1) for output (variable) SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) USB A -- USB B -- LAN/ DIGITAL LINK RJ-45 x 1 (for network connection, 10Base-T, 100Base-TX, compliant with PJLink Built-in speaker 4 cm round shape x 1, output power: 10 W (monaural) Noise level*3 37 dB (lamp power: Normal), 29 dB (lamp power: Eco) Cabinet materials Molded plastic Dimensions (W x H x D) 389 x 125.0*7 x 332 mm (15-5/16 x 4-29/32*7 x 13-1/16 in) Weight*7 Approx. 4.8 kg (10.6 lbs) Operating temperature 0°C-40°C [32°F-104°F] (less than 1,200 m [3,937 ft] above sea level), 0°C-30°C [32°F-86°F] (between 1,200 m and 2,700 m [3,937 ft and 8,858 ft] above sea level)*8 Operating humidity 20-80 % (no condensation)

Vendo Sansui Pre-Amplificador + potencia. El preco es por ambos productos impecable estado, funciona perfecto, con control remoto. Excelente calidad de sonido, para entendidos. Specifications B- Power output: 75 watts per channel into 8¿ (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.05% Input sensitivity: 1V Signal to noise ratio: 110dB Speaker load impedance: 8¿ to 16¿ Dimensions: 430 x 127 x 224mm Weight: 7kg Specifications C- Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Input sensitivity: 2.7mV (MM), 240mV (line) Signal to noise ratio: 75dB (MM), 110dB (line) Output: 120mV (line), 1V (Pre out) Dimensions: 430 x 92 x 238mm Weight: 3.2kg Se retira por la zona de Olivos, no realizo envios al interior. Sansui Pre-amplificador + Potencia C+b

Potencia M-70 y pre-amplificador C-70 yamaha, en excelente estado estético como funcional, muy buen sonido,hermoso conjunto Made in Japan.  Specifications M-70 Power output: 200 watts per channel into 8¿ (stereo) Frequency response: 1Hz to 100kHz Total harmonic distortion: % Damping factor: 200 Input sensitivity: 1.41V Signal to noise ratio: 124dB Dimensions: 435 x 380 x 133mm Weight: 13.7kg Year: Specifications C-70 Frequency response: 5Hz to 100kHz Total harmonic distortion: % Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 90dB (MC), 94dB (MM), 105dB (line) Channel separation: 70dB (MM), 60dB (line) Output: 150mV (line), 1.5V (Pre out), 10V (Pre out Max) Semiconductors: 138 x transistors, 15 x IC, 14 x FET, 9 x LED, 83 x diodes Dimensions: 435 x 96.5 x 369mm Weight: 7.2kg Se acepta audio de mi interes. Potencia Y Preamplificador Yamaha M-70/c-70 Impecables. $

GRABADOR Y REPRODUCTOR PROFESIONAL DE CINTA ABIERTA AKAI GX-210D  Una de las más afamadas marcas. Funciona perfectamente. De excelente sonido y construcción robusta. Carretes de 7 pulgadas y cintas de 1/4 de pulgadas / tres motores / auto-reverse/2 velocidades /cabezales de cristal de ferritte/excelente sonido. Prácticamente no ha sido utilizado. Puede verse en el detalle de las fotos que no se observa desgaste de manipulación. Especificaciones ténicas más detalladas Track System: 4-track, 2-Channel stereo. Sistema de pista: 4 pistas, 2 canales estéreo. Reel size: Up to 7 inch. Reel tamaño: hasta 7 pulgadas. Tape Speed: 3-3/4 and 7-1/2. Velocidad de la cinta: 3-3/4 y 7-1/2. RCA-connections for Input and Output. RCA-conexiones para entrada y salida. DIN-connection DIN-conexión Auto-Reverse Function. Función de auto-reversa. Less than 0.12% RMS at 3-3/4 speed. Menos de 0,12% en RMS 3-3/4 velocidad. Frequency response: 30Hz to Hz (+-3dB)7-1/2. Respuesta de frecuencia: 30 Hz a Hz (+-3dB) Hz to Hz (+-3dB) Hz a Hz (+-3dB) 3-3/4. Signal to Noise ratio: Better than 50 dB. Señal a ruido: Mejor que 50 dB. Erase ratio: Better than 70 dB. Borrar proporción: Mejor que 70 dB. Cross-Talk: Better than 45 dB. Cruz-Charla: Mejor que 45 dB. Bias Frequency: 102 kHz. Sesgo de frecuencia: 102 kHz. Heads: One recording/erase combination GX-head Jefes: Una grabación / borrar combinación GX-cabeza and one playback GX-head. y una reproducción GX-cabeza. Motors: Direct drive Motor: Direct Drive (2)Eddy-current outer reel-motors. (2) de Foucault exterior bobinas de motores. Capstan-motor 4/8-pole hysteresis synchronous. Cabrestante-motor síncrono 4/8-pole histéresis. Fast Forward Rewind Time: 75 seconds with -feet tape. Avance rápido retroceso Tiempo: 75 segundos, con pies de cinta. Recording capacity: 2 hours at 3-3/4 speed, feet tape. Capacidad de grabación: 2 horas a 3-3/4 velocidad, metros de cinta. 2 mic input located on the faceplate. 2 entrada de micrófono situado en la placa frontal. Headphone-jack 1/4 located on the faceplate. -Jack para auriculares 1 / 4, ubicado en la placa frontal. Semi-Conductors: 15 diodes + 29 transistors. Semi-conductores: 15 diodos + 29 transistores. Voltage-selector: 100V-240V,AC Hz. Selector de voltaje: 100V-240V AC Hz. Power consumption: 100W max. Consumo de energía: 100W máx. Dimensions: Dimensiones: 14,6 Tall. 14,6 Tall'afar. 14,5 Wide. 14,5 Amplia. 8,9 Deep. 8,9 profundas. 

Auricular Inalambrico Jbl Synchros E40bt Bluetooth Bateria Auricular Inalambrico Jbl Synchros E40bt Bluetooth Bateria Consulte color Disponible Negro / Azul Transmitter Power Bluetooth Transmission Range 2.402 to 2.480 GHz Bluetooth Module GFSK p/4 DQPSK 8-DPSK Bluetooth Profile Support 3.0, A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2 Power Input 30 mW Frequency Response 20 to 22,000 Hz Impedance 32 O Maximum SPL 114 dB at 30 mW Mic Sensitivity -42 dBV/PA at 1,000 Hz Battery Type Lithium polymer (3.7 V, 610 mAh) Playing Time 16 hours Talk Time 24 hours Driver 40 mm Compatibility iPad (Mini, 3rd & 4th gen), iPhone (5s, 5c, 5 & 4s), iPod touch, MacBook Air, MacBook Pro, Mac mini, Android 1.5 Cupcake to Android 4.4 KitKat, Blackberry 1.0 to Blackberry 10 OS Power Input 30 mW Connection 1/8

Auricular Inalambrico Jbl Synchros E40bt Bluetooth Auricular Inalambrico Jbl Synchros E40bt Bluetooth Bateria Consulte color Disponible Negro / Azul Transmitter Power Bluetooth Transmission Range 2.402 to 2.480 GHz Bluetooth Module GFSK p/4 DQPSK 8-DPSK Bluetooth Profile Support 3.0, A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2 Power Input 30 mW Frequency Response 20 to 22,000 Hz Impedance 32 O Maximum SPL 114 dB at 30 mW Mic Sensitivity -42 dBV/PA at 1,000 Hz Battery Type Lithium polymer (3.7 V, 610 mAh) Playing Time 16 hours Talk Time 24 hours Driver 40 mm Compatibility iPad (Mini, 3rd & 4th gen), iPhone (5s, 5c, 5 & 4s), iPod touch, MacBook Air, MacBook Pro, Mac mini, Android 1.5 Cupcake to Android 4.4 KitKat, Blackberry 1.0 to Blackberry 10 OS Power Input 30 mW Connection 1/8

Excelente preamp Audient Mico Oportunidad: tan sólo fue probado su funcionamiento, asique está igual a nuevo. Podés incorporar 2 canales profesionales clase 'A' de preamplificación a tu estudio profesional o home-studio. Y si disponés de entrada digital spdif u óptica tenés además la opción de conversores análogo-digital de altísima calidad (omitiendo en este caso también los conversores stándar de tu actual interface). No se aceptan permutas. Twin ASP008 discrete Class A Mic Pres Rear panel Mic/Line inputs on Combi XLR/Jack Rear panel line output on XLR Switchable Hi-Pass filters - 40Hz, 80Hz, 120Hz Phase invert Switchable 48V phantom -20dB Pad 18 to 66dB gain continuously variable Channel One: Front panel DI input - 500kOhms HMX Harmonic sculpting function from Black Pre Channel Two: Variphase - phase shift between o Analogue to Digital Conversion Ultra-high performance 24 bit kHz low-jitter internal clock 44.1 to 192kHz using external word clock AES/EBU, S/PDIF Coaxial and TOSLINK outputs Word Clock input on BNC Switchable Word Clock termination

AMPLIFICADOR DE POTENCIA STEREO DE 150W POR CANAL El amplificador de potencia NuPrime ST-10 ofrece 150W Stereo a 8 Ohm. Se caracteriza por un sonido de musicalidad valvular, combinado con la precisión del sonido de una amplificación de estado sólido con tecnología de switcheo, ofreciendo un balance ideal entre las texturas de los agudos, autoridad en las frecuencias bajas y extremadamente altas dinámicas, generando un sonido completamente revelado y dimencional. AMPLIFICADOR DE CLASE REFERENCE LE El Amplificador NuPrime ST-10 ofrece la 4ta generación del módulo de amplificación (V4 board) iniciado por los productos High End de NuForce y continuado en su desarrollo por NuPrime, logrando así: ° Reducir el Noise floor 20dB y elevando la eficiencia del output stage en un 85%. ° Disminuir el largo de los circuitos en un 20%. ° Protección aumentada frente a cortocircuitos. ° Aumento en la capacidad de Output para manejar Bafles extremadamente ineficientes. ° Se ha aumentado la Frecuencia de Switcheo a 700 KHz, mejorando la tasa de muestreo musical. ° Se ha mejorado el Signal to noise ratio y se ha aumentado el rango dinámico. ° Nueva fuente de alimentación lineal con un transformador toroidal de alta eficiencia. ° Uso del Circuito Harmónico H2, que toma las características más atractivas del sonido de un amplificador valvular sin sus contras ni limitaciones. CARACTERÍSTICAS DE LA AMPLIFICACIÓN NUPRIME El diseño del circuito patentado por NuPrime se basa en la auto modulación analógica de una señal que ocurre naturalmente, sin agregar ruido ni Jitter, haciendo uso de todo el potencial de la amplificación de switcheo, sin lidiar con las dificultades asociadas a los amplificadores de switcheo digital puros, en otras palabras, ofrece lo mejor de ambos mundos, no se producen altas temperaturas, y su diseño puede ofrecer altas prestaciones con un Output de 2 x  150W en un equipo compacto que pesa tan solo 6 Kg. Al realizar el switcheo a Hz, los transformadores y capacitores operan en forma más eficiente, permitiendo reducir el tamaño. Raramente un Amplificador clase A  llega a usar un 30% de la energía que toma, siendo el 70% restante traducido a un aumento en la temperatura, lo que disminuye la vida útil de los capacitores electrolíticos que se suelen usar en abundancia en esos diseños. En cambio, los amplificadores Nuprime aprovechan ésta energía en un 85%, lo que se traduce en una operatoria a bajas temperaturas y un muy bajo consumo energético.                        VENTAJAS DE LA AMPLIFICACIÓN NUPRIME ° Alto ancho de banda con una respuesta lineal y plana en el espectro de frecuencias de 20 a Hz, lo que mejora la reproducción de músca compleja, con un gran soundstage y una precisa separación espacial. ° Posee un factor Damping extremadamente elevado (Factor Damping es la medición de la capacidad de un amplificador para manejar y controlar un bafle, mientras más, mejor). Un excelente amplificador valvular tiene entre 10 y 100, un amplificador clase A de altísima calidad puede llegar hasta 200. Los amplificadores NuPrime poseen un factor Damping de 400, y a diferencia de amplificadores convencionales, el factor Damping de NuPrime no se ve afectado por cambios en las frecuencias de sonido, entregando rápidas dinámicas a cualquier bafle. ° Ultra baja distorsión y ruido. En amplificadores convencionales, los fabricantes presentan estos resultados en mediciones efectuadas a 1 watt, cuando en realidad, al aumentar la potencia, aumentan también el ruido y la distorsión. Nuprime ofrece tecnologías que eliminan la distorsión a cualquier ciclo de operación, manteniendo la misma baja distorsión en cualquier nivel de output y a cualquier frecuencia. ° Poseen un diseño patentado, que a cualquier frecuencia produce cero cambios de fase, reduciendo así la distorsión ESPECIFICACIONES TÉCNICAS Input: 2 x RCA Output: Five-way binding posts Power Output: 150W x 2 at 8 Ohms Gain: 28 dB Input Impedance: 23.5k Ohms Sensitivity: 0.89 V to rated power THD+N: 0.01% Frequency Response: 0 Hz to Hz S/N Ratio: 110dB at 1W, 10W, 100W Dimensions: 59 mm H x mm W x 394 mm D Weight: 6 kg SONIDO E HISTORIA DE NUPRIME NuPrime fue fundada por el Ex CEO y fundador de NuForce, Jason Lim, quedándose con su línea de productos high end y las patentes de tecnologías desarrolladas en NuForce, dedicándose a producir únicamente High End en serio, productos de musicalidad insuperables, con los mejores componentes diponibles, y a precios accesibles. Algunas de las características de sus productos son: Enorme Soundstage. Sonido que aparece en forma inmediata y precisa con un amplio rango dinámico. Ultra bajo ruido y distorsión. Reproducción con un fondo silencioso, con delicados detalles y matices intactas. Más información del producto en:  WWW.NUPRIMEAUDIO.COM   Soy el distribuidor oficial de la marca. LOS PRODUCTOS SON NUEVOS EN CAJA CERRADA. SOY EL DISTRIBUIDOR DE LA MARCA PARA ARGENTINA, Y SE ENTREGAN CON DOS AÑOS DE GARANTÍA, SE REALIZAN ENVÍOS AL INTERIOR.                            Amplificador De Potencia Nuprime St-10 Ultra High End 150w/c $

Cámara De Video, Filmadora Full Hd Sony Hdr-cx115 Esta cámara está igual a nueva, fue usada 2 o 3 veces solamente. Incluye una memoria de 16GB y un estuche Sony original para transportarla de forma segura. También incluye todos sus cables originales para cargar, conectar a distintos dispositivos, etc. Tiene un zoom y una calidad de video impresionantes, la pantalla es touch y rota 180º, puede filmar mini videos en slow motion, sacar fotos mientras se realiza una filmación, amplia conectividad, etc. Es un caño, realmente una oportunidad!! Dejo el detalles técnicos. Audio -------- AUDIO SYSTEM: Dolby Digital 2ch AUDIO DUBBING 12BIT: NO BUILT IN MICROPHONE: Stereo with zoom microphone BUILT IN SPEAKER: YES SURROUND RECORDING: NO Camera ----------- IMAGE DEVICE: SIZE: 4.5mm (1/4 type) EXMOR™ R CMOS Sensor 14BIT DXP: NO CLEARVID TECHNOLOGY: YES EXMOR TECHNOLOGY: YES ADVANCED HAD TECHNOLOGY: NO IMAGE PROCESSOR: BIONZ X.V.COLOUR: YES NUMBER OF PIXELS GROSS (K): 4200 NUMBER OF PIXELS ACT CAMERA MODE (K): 16:9 Mode. 1350 / 4:3 Mode. 1010 NUMBER OF PIXELS ACT MEMORY MODE (K): 16:9 Mode. 1180 / 4:3 Mode. 1570 FOCUS: FULL RANGE AUTO: YES FOCUS: MANUAL: YES MANUAL FOCUS KEY: Panel SPOT FOCUS (TOUCH PANEL): YES SPOT METER: YES MINIMUM ILLUMINATION (LUX): 3 lux (1/25 Shutter Speed) STEADYSHOT (IMAGE STABILISATION): SteadyShot Active Mode FACE DETECTION: YES SMILE SHUTTER: YES D-RANGE OPTIMISER: YES NIGHT SHOT: NO CAMERA NOISE REDUCTION: YES SHUTTER SPEED: 1/6-1/10000 (including Scene Selection) WHITE BALANCE: Auto / Outdoor / Indoor / One-push SCENE SELECTION: Twilight / Twilight Portrait (Still only) / Candle / Sunrise & Sunset / Fireworks / Landscape / Portrait / Spotlight / Beach / Snow INTELLIGENT AUTO (IAUTO): YES GOLF SHOT: NO AUTO SLOW SHUTTER: YES BACKLIGHT COMPENSATION: YES SMOOTH SLOW REC: YES INTERVAL REC.: NO FADER: Black / White TELEMACRO: YES Dimensions ---------------- DEPTH (MM): 106 HEIGHT (MM): 56 WIDTH (MM): 50 WEIGHT WITHOUT TAPE/BATTERY (G): 210 Flash/Light --------------- FLASH: NO VIDEO LIGHT: NO HOLOGRAM AF: NO NIGHT FRAMING: NO Jacks -------- AUDIO INPUT: NO AUDIO OUTPUT: YES VIDEO INPUT: NO VIDEO OUTPUT: YES S-VIDEO INPUT: NO S-VIDEO OUTPUT: YES I.LINK (DV) INPUT: NO I.LINK (DV) OUTPUT: NO USB INPUT: NO USB OUTPUT: YES (Hi-Speed USB2.0) COMPONENT VIDEO OUTPUT: YES HDMI™ OUTPUT: YES EXTERNAL MICROPHONE INPUT: NO HEADPHONE JACK: NO Lens/Zoom --------------- LENS: Carl Zeiss Vario-Tessar F: 1.8-2.2 F (FOCAL DISTANCE) (MM): 2.5-62.5 F (35MM CONVERSION): CAMERA MODE (MM): 16:9 Mode. 37-1075 / 4:3 Mode. 45-1325 F (35MM CONVERSION): MEMORY MODE (MM): 16:9 Mode. 39-975 / 4:3 Mode. 36-900 WIDE ANGLE LENS: NO FILTER DIAMETER (MM): 30 ZOOM RATIO (OPTICAL): 25 ZOOM RATIO (DIGITAL): 300 PRECISION DIGITAL ZOOM: YES ZOOM KEY: Lever / Button on LCD (Touch screen) Still Image Recording ----------------------------- STILL IMAGE RECORDING ON MEMORY STICK: YES STILL IMAGE RECORDING ON INTERNAL MEMORY: NO COMPRESSION OF STILL IMAGE: JPEG IMAGE SIZE: MAX: 16:9 Mode. 2048 x 1536 (3M) / 4:3 Mode. 2048 x 1152 (2.3M) IMAGE SIZE: VGA: 640 x 480 BURST RECORD AUTO EXPOSURE BRACKETING: NO BURST RECORD MULTI 9 PICTURES: NO INDEX PLAYBACK: YES MEMORY MIX: NO PICTBRIDGE COMPATIBILITY: YES STILL RECORDING DURING MOVIE (DUAL REC): YES (2.7M, when [REC MODE] is set to [HD FX], you cannot use Dual Rec.) Others --------- QUICK ON: YES 16:9 WIDE (FULL) RECORDING: YES START / STOP REC BUTTON ON LCD: YES ZOOM BUTTON ON LCD: YES BRAVIA SYNC: YES FULL HD PROGRESSIVE PLAYBACK: YES ACCESSORY SHOE: NO BATTERY INFO: YES DEMONSTRATION MODE: YES INFOLITHUM SYSTEM: YES PICTURE EFFECTS: NO DIGITAL PICTURE EFFECTS: NO POWER CONSUMPTION: LCD (W): 3 CONTINUOUS RECORDING TIME WITH SUPPLIED BATTERY AND LCD BACKLIGHT OFF (MIN): 125 MAX. CONTINUOUS RECORDING TIME WITH OPTIONAL BATTERY AND LCD BACKLIGHT OFF (MIN): 515 PROGRESSIVE RECORDING MODE: NO USB STREAMING: NO EASY HANDYCAM: YES Supplied Accesories --------------------------- AC ADAPTOR: AC-L200 AV CABLE: Multi (No S-cable) RECHARGEABLE BATTERY PACK: NP-FV50 HANDYCAM STATION: NO USB CABLE: YES USB DRIVER: YES EDITING SOFTWARE: Picture Motion Browser (PMB) STYLUS PEN: NO SHOULDER STRAP: NO WRIST STRAP: NO TAPE / CLEANING TAPE: NO WIRELESS REMOTE COMMANDER: NO 21 PIN ADAPTOR: NO LCD Monitor ----------------- LCD TYPE: Clear Photo LCD HYBRID LCD SCREEN: YES LCD: SIZE: 6.7cm / 2.7

Amazon Alexa Echo en tu auto. Recien lanzado en USA Nuevo en caja cerrada. Entrega inmediara. Add Alexa to your car - Connects to the Alexa app on your phone and plays through your car’s speakers via auxiliary input or your smartphone’s Bluetooth connection. Includes Vent Mount. Designed for the road - With 8 microphones and far-field technology, Echo Auto can hear you over music, A/C, and road noise. Go beyond radio - Voice control Echo Auto through the Alexa app to stream from Audible, Amazon Music, Apple Music, Spotify, SiriusXM, and radio stations with TuneIn and iHeartRadio. Just ask - Use your voice to play music, check the news, make calls, add to your to do-list, manage your calendar, and more. Designed for your privacy - You can press the microphone off button to electronically disconnect the microphones. Check for compatibility – Echo Auto is not compatible with all cars and phones. See if it will work for you below.

Combo Dj! Allen&heath Xone 23c + Auricular Profesional Hd 25 ALLEN&HEATH XONE 23C DJ MIXER The Xone:23C brings together the best of digital DJing and conventional mixing in a compact accessible format. This high performance DJ mixer is equipped with a premium quality, 4 stereo channel 96kHz 24bit internal soundcard and offers plug n’ play connection via X:LINK to Xone:K series controllers, making it perfect for performers looking to combine the convenience of digital DJing and recording with the hands-on control and visual appeal of a real mixer. Xone:23C includes an enhanced version of the legendary Xone filter with resonance control, VCA faders, 3 band total kill EQ, illuminated switches, crossfader curve selector and styling inspired by the flagship Xone:DB4. FEATURES At the heart of the mixer is the renowned analogue Voltage Control Filter (VCF) system offering Low-Pass and High-Pass filters, frequency sweep and ‘mild to wild’ resonance control. There is also an FX loop to connect to third party FX units, which route back in through the filter system. Xone:23C features 2+2 stereo channels with dual levels for phono and line inputs, allowing four music sources to be connected at the same time, including turntables and CD/media players. Additionally, the internal soundcard enables replay and recording from DJ software, offering users all the benefits of digital DJing whilst using hands-on mixer controls. The main mix output and mic input are on professional standard balanced XLR’s, and there is a dedicated record output. The Xone:23C is equipped with comprehensive monitoring facilities, including a dedicated booth output with its own volume control, a cue mix control, and signal levels clearly displayed on the 9 segment peak hold meters. Styled on the flagship Xone:DB4, the Xone:23C includes soft touch, backlit controls, light-piped meters and a distinctive new shaped steel faceplate. The mixer can also be upgraded with the latest Innofader for enhanced scratch performance, available as an accessory. SENNHEISER HD 25 PROFESSIONAL DJ HEADPHONE Color: black Frequency response (Headphones): 16 - 22000 Hz THD, total harmonic distortion: Ear coupling: supraaural Jack plug: 3,5/6,3 mm stereo Cable length: 1,5 m Transducer principle: dynamic, closed Weight Without cable: ~ 140 g Nominal impedance 70 O Load rating 200 mW Max. Sound pressure level (active) 120 dB

No se venden por separado. AM-2400 --------------------------------------------------------------------------------------- Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.15% Damping factor: 60 Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MM), 95dB (line) Channel separation: 55dB (MM) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4? to 16? Semiconductors: 33 x transistors, 15 x diodes Dimensions: 440 x 141 x 331mm Weight: 9.1kg AT-2400 --------------------------------------------------------------------------------------- Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue FM Tuning Range: 88 to 108 MHz MW Tuning Range: 520 to 1605 kHz Sensitivity: 1.8uV (FM), 180uV (MW) Signal to Noise Ratio: 75dB (FM), 50dB (MW) Distortion: 0.3% (FM) Selectivity: 80dB (FM), 30dB (MW) Output: 770mV (FM), 250mV (MW) Semiconductors: 12 x transistors, 9 x diodes, 1 x FET, 4 x IC Dimensions: 440 x 141 x 336mm Weight: 6.6kg

Roku Streaming Stick HD/4K/HDR Streaming Device with Long-range Wireless and Voice Remote with TV Power and Volume Especificaciones del Roku Streaming Stick Qué incluye Roku Streaming Stick Control remoto con botones para encendar el TV y ajustar el volumen USB con receptor inalámbrico avanzado Adaptador de corriente Redes Inalámbrica de doble banda 802.11ac MIMO Compatibilidad de TV HD TVs – Up to 1080p (1920 x 1080) with up-scaling from 720p 4K UHD TVs – Up to 2160p at 60fps (3840 2160) with up-scaling from 720p and 1080p. TV must have an HDMI input that supports HDCP 2.2 4K UHD HDR TVs – Supports HDR10. TV must have an HDMI input that supports HDCP 2.2 Puertos Energía, HDMI 2.0a, mini USB para el receptor inalámbrico avanzado Característica de audio Estéreo digital sobre HDMI Paso de DTS Digital Surround a través de HDMI Dolby Audio y Dolby ATMOS pasan a través de HDMI Control remoto Control remoto con botones de encendido/apagado de TV y control de volumen Consumo de energía 3 W (típicamente) al reproducir video en 4K UHD Entrada de alimentación Adaptador eléctrico 5V-1A Tamaño 3.7 x 0.8 x 0.47 pulgadas Peso 0.9 onzas ----------------------------------------------------------- - Peso: 0.20 kg.

Home Teather Yamaha NS-P40 nuevo, tiene menos de un mes. Para usar con cualquier amplificador o receiver. Si lo ves te vas a dar cuenta que es nuevo. Mucho mejor que el NS-P20 que se esta ofreciendo. Impecable tanto técnicamente como estéticamente. Subwoofer de 100W Producto vigente en USA, no esta discontinuado (ver web yamaha) Lo vendo por que me traen otro equipo de USA Si no estas seguro no ofertes. Se puede ver y probar sin problemas. Estoy en la zona de Retiro. No hago ningún tipo de descuento. Descripción 5.1 channel traditional design speaker package HD Audio compatibility and speakers with sufficient volume for rich sound Subwoofer delivers surprisingly dynamic bass thanks to its Advanced YST II design Glossy black cabinets match the latest TV designs Traditional design enhances any room Wall mountable (front, center and surround) Datos Técnicos Front Speaker Sensitivity: 83 dB/2.83 V/1 m Center Speaker Type: Full-range acoustic suspension Nominal Input Power: 30 W Maximum Input Power: 100 W Sensitivity: 84 dB/2.83 V/1 m Weight: 0.73 kg Surround Speaker Type: Full-range bass-reflex Driver: 7 cm (2-3/4?) full-range cone Nominal Input Power: 30 W Maximum Input Power: 100 W Sensitivity: 83 dB/2.83 V/1 m Weight: 0.59 kg / unit Subwoofer Type: Advanced YST II with Linear Port Driver: 16 cm (6-1/2?) cone Output Power: 50 W (5 ohms, 100 Hz, 10% THD) Dynamic Power: 100 W Weight: 8 kg

NAKAMICHI habla solo por su nom,bre, pero para el que no conoce, aqui les dejo las especificaciones! ESPECIFICACIONES DE LA POTENCIA 620 Power output: 100 watts per channel into 8¿ (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.005% Damping factor: 100 Signal to noise ratio: 120dB Semiconductors: 3 x ICs, 46 x transistors, 41 x diodes Dimensions: 400 x 189 x 248mm Weight: 12.5kg PRE AMPLIFICADOR 610 Frequency response: 20Hz to 100kHz Total harmonic distortion: 0.005% Input sensitivity: 0.2mV (mic), 1mV (MM), 75mV (line) Signal to noise ratio: 53dB (mic), 80dB (MM), 85dB (line) Output: 316mV (line), 1V (Pre out) Semiconductors: 2 x FET, 134 x transistors, 27 x diodes, 5 x zener diodes, 2 x IC Dimensions: 400 x 170 x 237mm Weight: 7kg    

Potencia Amplificador Gemini Xga 3000 Rms 400w Caracteristicas: Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz 8O) >350 Input Impedance 20K O Fuse 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo 8 O 2 x 150W RMS Output Stereo 4 O 2 x 200W RMS Output Bridged 8 O 400W RMS Dimensions (WxDxH) 19” x 13.8” x 3.5” (482mm x 350mm x 88mm) Net Weight 19 lbs (8.6 kg)

AKG K-240 STUDIO Consultar zonas de Entrega GRATIS en Capital Federal, y en el dia!!! (Lunes a Viernes de 9.30hs a 19hs). Si estas en Capital Federal y abonas mediante Mercado Pago, para que el envío sea sin cargo, tenes que optar por la opción " ACUERDO EL ENVIO CON EL VENDEDOR ". Si optas, por "QUIERO QUE ME LO ENVIEN",  va a ir por medio de OCA MERCADOENVIOS, y ese servicio Si tiene costo, por más que estes en Capital Federal. Cerrado en caja, y con 6 meses de garantía. Emitimos facturas "A" y "B". AKG K 240 Studio Professional Semi-Open Stereo Headphones The K 240 Studio headphones from AKG feature a semi-open circumaural design, and use patented Varimotion technology and extra-large transducers to deliver extremely precise, detailed sound. The headphones have a self-adjusting headband, as well as thick around-ear cushions for lasting comfort. The single-sided detachable straight cable resists tangles and can be easily replaced. The cable has a gold-plated 3.5mm plug with a 1/4" screw-on adapter to provide wide compatibility with consumer and professional audio devices. Semi-open, circumaural design XXL speakers with patented Varimotion technology for crisp, detailed sound Self-adjusting headband fits virtually any head size Thick around-ear cushions for lasting comfort Single-sided detachable cable resists tangles and offers easy replacement Gold-plated stereo 3.5mm mini plug with 1/4" adapter for compatibility with a variety of consumer and professional devices Type Circumaural, Semi-Open, Dynamic Frequency Range 15 Hz - 25 kHz Impedance 55 Ohms Sensitivity 91 dB/mW (104 dB/V) Maximum Input Power 200 mW Connectors Gold-Plated 3.5 mm Stereo Mini Plug with 1/4" Adapter (Cable Connects to Headphones via Mini XLR) Cable Length 9.8' (3 m) Weight 8.5 oz (240 g) (Without Cable) Packaging Info Package Weight 1.25 lb Box Dimensions (LxWxH) 9.3 x 8.8 x 4.4" Consultar zonas de Entrega GRATIS en Capital Federal, y en el dia!!! (Lunes a Viernes de 9.30hs a 19hs). Si estas en Capital Federal y abonas mediante Mercado Pago, para que el envío sea sin cargo, tenes que optar por la opción " ACUERDO EL ENVIO CON EL VENDEDOR ". Si optas, por "QUIERO QUE ME LO ENVIEN",  va a ir por medio de OCA MERCADOENVIOS, y ese servicio Si tiene costo, por más que estes en Capital Federal. Cerrado en caja, y con 6 meses de garantía. Emitimos facturas "A" y "B".

Marca Technics Modelo SU-8600 Cantidad de canales 2 Ancho 45 cm Altura 17.3 cm Profundidad 35.2 cm Power output: 73 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.08% Damping factor: 50 Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 73dB (MM), 92dB (line) Output: 150mV (line), 1V (Pre out) Speaker load impedance: 4? to 16? Dimensions: 450 x 173 x 352mm Weight: 12.7kg

Deck Jvc Dd-9 3 Cab Top Audiofila Legendaria Leer DECK JVC DD-9 3 CAB AUTO CALIBRACION 2 MOTORES TOPE DE LINEA AUDIOFILA LEGENDARIA MADE IN JAPAN, PERFECTO FUNCIONAMIENTO SOLO TIENE MUY PEQUENOS DETALLE EN SU SERIGRAFIA. 220V TOMO AUDIO EN PARTE DE PAGO. ATENCION AVERIGUAR ANTES DE COMPRAR POR LA FORMA DE PAGO. Y POR MOTIVOS DE PASADAS EXPERIENCIA POR MALTRATO, ENVIOS NO HAGO, HABIA ENVIADO EQUIPOS EN PERFECTAS CONDICIONES Y DEVOLVIERON GOLPEADO O CON AVERIAS, POR ESTA RAZON ENVIOS NO HAGO, EL RETIRO TIENE QUE SER PERSONALMENTE. JVC DD-9 is a two-motor, three-head cassette deck that includes, among its many advanced features, the new Dolby-C noise-reduction system. Through virtually doubling the amount of noise reduction provided by the normal Dolby-B system (or its JVC equivalent, ANRS), C-type Dolby is designed to meet the needs of today’s wider-dynamic-range recordings without losing compatibility with existing Dolby-B-encoded tapes. The DD-9 thus provides switches for selecting either no noise reduction, ANRS/Dolby-B, or Dolby-C. The capstan of the DD-9 is direct-driven by a quartz-locked servomotor, and a separate d.c. motor is used to turn the reels. The record- and playback-head elements, both housed in a single casing, are made from Sen-Alloy and have tapered („X-cut”) pole pieces to reduce variations in low-frequency response. (review from hifi-classic.net) JVC DD-9 main features: Noise Reduction Dolby-B Noise Reduction Dolby-C Noise Reduction MPX Filter ANRS Noise Reduction Super ANRS Noise Reduction Head Configuration 3 Head Design 4 Track / 2 Channel Transport Sìngle Capstan Transport Direct Drive (Capstan) Mechanical Tape Loading Auto Shutoff Quartz Controlled Transport Tape Chrome Tape Capability Normal Tape Capability Metal Tape Capability Manual Tape Type Selection Exterior Front Loading Orientation Right Silver Finish Display 4-Digit Digital Counter Peak Hold Digital Peak-Reading Meters Multi Color Peak-Reading Meters Meters Peak / VU Switchable Calibration Auto Bias Calibration Auto Equalizer Calibration Auto Level Calibration Connectivity 2 Mono Microphone Inputs Headphones RCA Input/Output Connectors Wired Remote Control Operation Timer Recording/Playback Real-Time Tape Monitoring Record Mute Full Logic Transport Control Stop Watch Preamplifier Record Level Balance Control Output-Level Control Master Record Level Control General Stereo Rear Controls Voltage Switchable (Rear) Indicators Record Cassette Back Lighting Dolby B Dolby C Fast Forward Play Pause Rewind Metal Tape Record Mute Source/Tape Speed 1¿ ips – 4.76 cm/s Electronics Record Protection Power Requirements Alternating Current

hermoso sintoamplificador vintage KEN BROWN SS3350 original y funcionando serigrafia impecable RETIRA X SAN ISIDRO ZONA ESTAC TREN DE LA COSTA ************Vta ef vo en ma no******** ENVIOS X MICRO PREVIO DEPOSITO BANCARIO Specifications Tuning range: FM, MW Power output: 55 watts per channel into 8¿ (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.08% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 80dB (MM), 86dB (line) Speaker load impedance: 4¿ to 16¿

increibla amplificador SANSUI AU101 JAPAN Original y funcionando perfectamente de coleccion envios x micro previo deposito bancario no tomo nada en parte de pago se retira x san isidro zona estacion tren de la costa Power output: 15 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 60kHz Total harmonic distortion: 0.8% Input sensitivity: 4mV (mic), 3mV (MM), 200mV (DIN), 200mV (line) Signal to noise ratio: 65dB (MM), 75dB (line) Channel separation: 45dB (MM), 45dB (line) Output: 200mV (line), 30mV (DIN) Speaker load impedance: 4Ω to 16Ω Semiconductors: 18 x transistors, 4 x diodes Dimensions: 407 x 115 x 278mm Weight: 5.9kg